MX-2, MX-3 and
MX-4

_________________________________________________
DATA SHEET

Fount dosing is used to control the pH level of the fountain solution.

The MX-2, MX-3 and MX-4 dosers are available for the Pressmate 2kW,
4kW, 6kW, 8kW and 10kW circulators and can be installed as an
upgrade on existing dampening units.


Doser MX-2:
* Automatic additive doser 1-5%
* Continuous flow of 10 to 40 l/min
* Can be wall mounted and used for multi-dampening unit dosing
* Removable outer cover giving full access for service
* Separate tap feed for sampling fount solution
* Inlet water filter
* Simple set-up and operation


Doser MX-3: - The MX-3 offers the same specifications as the MX-2 except:
* Automatic additive doser 3-10%
* Suitable for dosing alcohol substitute for alcohol free printing


Doser MX-4: - The MX-4 offers the same specifications as the MX-2 except:
* Automatic additive doser 5-20%
* Suitable for dosing alcohol subsitute for alcohol free printing

* Standard voltages shown - other electrical specifications available on request.
* MGE can offer tailored solutions to exactly match customer requirements.

MGE reserve the right to change, improve and/or modify all or any products manufactured and sold by us at anytime; this does not incur any obligation on our part to make like changes to any of our products previously sold.
Voltage
Water Inlet Pressure
Water Inlet Flow
230v +/-15%, 50/60Hz
1 to 6 bar
Additive Dosing:
1 to 5%
Range
Output
10 to 40 l/min
Inlet Water Filter
Weight
Dimensions (HxWxD) mm
350 micron
12 kg

 

435 x 630 x 155
230v +/-15%, 50/60Hz
1 to 4 bar
1 to 6 bar
230v +/-15%, 50/60Hz
5 to 20%
3 to 10%
10 to 40 l/min
350 micron
10 to 30 l/min
12 kg
12 kg
435 x 630 x 155
435 x 630 x 155
10 to 40 l/min
10 to 30 l/min
10 to 40 l/min
MX-2

 

 

MX-3
MX-4
350 micron